Find Generator With Installation, Turnkey System, Biomass Gas Generator on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Biomass generator set > 500kw Experienced Manufacturer for Biomass Gas Generator

500kw Experienced Manufacturer for Biomass Gas Generator

Basic Info

Model No.:  LHBMG500

Product Description

Model NO.: LHBMG500 Certification: ISO, CE Standard: Standard Pressure: 3-20kpa Trademark: LVHUAN Specification: check with us Power: 500kw Output Type: AC Three Phase Starting Mode: 24V Electric Motor Intake Mode: Naturally Aspirated Transport Package: Plastic Film Cover or Plywood Box Origin: China
Technical Parameters of 20-600KW Biogas Genset
Gas Mixing Type Outside
Rated Voltage 400V/230V
Phase 3 phase , 4 wire
Rated Frequency 50Hz
Rated Speed 1500r/min 1000r/min
Power factor  0.8
Voltage regulating range 95-105%
Voltage Steady State ≤ ± 2%
Voltage Transient State ≤ ± 10%
Voltage setling ≤ 1S
Voltage volatility ≤ ± 5%
Frequency Steady State Regulation rate ≤ 0.5%
Frequency Transient State Regulation rate ≤ ± 10%
Heat consumption ≤ 11.38mj/kw.h
Pressure 3-20kpa
Intake Mode naturally aspirated , Supercharging,inter cooler
Sparking mode Spark plug
Voltage regulation mode Automatic
Speed regulation mode electronic speed regulate
Lubricating mode pressure and splash
Cooling mode circulating water cooling
Starting mode 24V electronic  motor
Overhaul time ≥ 30000h
Noise ≤ 105dB ( A )
Exhaust Temperature ≤ 650ºC

Biomass Generator Core Features:
Manufacturer supply
Power supply range:10-700kw
Continuous supply range: 8-500kw
Standard component and assembly
Multi-option of control panel
With CE and ISO certificate

Work site requirements:
The work site needs to meet following basic requirements: 
a)  Ambient temperature between -40ºC~40ºC;
b)  Relative humidity less than 95%(35ºC);
c)  Site elevation not higher than 2500m;
d)  For outdoor installation, simple rain shelter is required.
 
Biomass Generator Fuel gas requirement: 
The generator set will be able to output at its full power with fuel gas with the specification as below:
1m distance away from generator set's pressure regulating valve of inlet
Temperature of  syn gas ≤40ºC;
Pressure of syn gas 5~20kPa, velocity of pressure≤ 1kPa/min;
H2S≤200mg/Nm3;
NH3≤20mg/Nm3;
Coke tar content≤20mg/Nm3; 
Impurities particle size≤5μm; impurity content≤30mg/Nm3;
Moisture Content of  syn gas ≤40g/Nm3;
biomass gas calorific value≥4.2MJ/Nm3.
Purification of biomass gas have a significant impact on machine life and continuous running time!

500kw Experienced Manufacturer for Biomass Gas Generator
500kw Experienced Manufacturer for Biomass Gas Generator
 Packaging & Shipping 1.  Generator set would be covered with plastic film cover ; 
2.  Control panel, batteries, electric cables are packed with plywood boxes;
3.  Exhaust pipes, Engine mufflers are put in the container without packing. 500kw Experienced Manufacturer for Biomass Gas Generator

Certificate
We have CE , ISO14001 , ISO9001 and CEC certificate to keep the quality . Welcome to contact us for more details .
Sincerely welcome to visit our factory and build reliable and long term cooperation relationship .
500kw Experienced Manufacturer for Biomass Gas Generator

FAQ:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.

2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
 
3. What's the genset warranty?
The warranty is one year.  
Free service and Spare Parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
 
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
 
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
 
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.

7. What is your regular delivery time?
30 days after order releasing.

 

Contact us if you need more details on Biomass Gas Generator Set. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Electric Genset、Internal Combustion Generator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Biomass generator set