30kw-1wm Coal Gas Electric Power Generator Made in China Manufacturer

Model NO.: LHCG30 Certification: CE, ISO Standard: Standard Exciting Method: Brushless Specification: check with us HS Code: 8502200000 Gas Source: Gas Power: ＜50kW Warranty: 1 Year Trademark: LVHUAN Origin: China

Parameter of Coal Gas Generator Set
Model Number (Engine Type)	LHCG30
Brand Name	LVHUAN
Prime power/Standby power	24KW/30KW
Rated Speed	1500/1800RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw.h
Lubricant consumption	≤1.0g/kw.h
Engine Capacity	4.33 L
Cylinder Number	4
Cylinder Bore	105mm
Stroke	125mm
Starting System	DC 24V electric motor
Cooling method	water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Chinese Stamford
Power Factor	0.8 lagging
Exciting method	brushless
Colour	your choice
Certificates	ISO 9001:2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	2100x900x1200mm
Weight	950kg

Worksite requirements:
The worksite needs to meet following basic requirements:
A) Ambient temperature between -40º C~40º C;
B) Relative humidity less than 95%(35º C);
C) Site elevation not higher than 2500m;
D) For outdoor installation, simple rain shelter is required.

Gas requirements:
The coal gas must be purified before burning in engine:
1. Gas temperature≤ Local temperature + 15º C(≤ 40º C is better)
2. Gas Pressure can be adjusted from 5-20 kPa, the changing pressure rate ≤ 1kPa/min.
3. Use low-sulfur coal, one set sulfur scrubber is necessary (H2S≤ 200mg/Nm3)
4. NH3≤ 20mg/Nm3
5. Tar and Particulate matter≤ 50mg/Nm3.
6. Diameter of Particulate matter≤ 5μ M, particulate content≤ 30mg/Nm3.
7. Moisture content≤ 40g/Nm3
10. Heat Value of coal gas: ≥ 4.2Mj/ Nm3.

Service committee
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.

2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.

3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.

Plentiful spare part supply
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2. All parts were from original factories or professional factories, complete in specification, keep good quality.

FAQ
1. How to choose the right model ? 
A : It depends on continuous output power, Voltage, Frequency and fuel type.  
Please tell me what fuel (natural gas, biogas, biomass gas,wood syngas, methane,coal gas) or raw material (like wood, grass, nutshell etc) The right model of generator will be recommend soon .
B : Our sales and engineers are always available at your service.
 
2. What is the oil consumption and capacity per hour ? 
A : 1.0-1.63g of lubricant oil consumption per hour. 
1.0 Cubic meter gas can produce 1.5 - 3.0 kw/h power. The capacity depends on gas energy(Kcal). E.g 1.0 Cubic meter natural gas produce about 3.0-4.0kw/h  
 
3. What is the overhaul ? 
A : About 30000 working hours. 
One week is enough to finish.  We offer manual for weekly, monthly and overhaul maintenance.
 
4. What is the warranty ? 
A : One year.
we offer all spare parts free of charge during warranty period. After this period, Spare Parts are not free. What's more, a set of spare parts will be shipped together with generator set free of charge.  
5. How is the after sale service and maintenance? 
A:We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.
 
6. What products we offer ?
Biomass gasifier,Biomass/syngas generator,biogas generator,Natural gas(CNG,LNG) / methane generator,Coal gas generator,Diesel generator.

7. How to make the order ?
Just send inquiry/message to our sales' Email , they will reply and offer the details ASAP according to your needs .

Contact us if you need more details on 30kw-1wm Coal Gas Electric Power Generator Made in China Manufacturer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about China Coal Gas Generting Set、China Gas Turbine Generation. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Coal gas generator set