60Hz or 50Hz 200kw 300kw 400kw 500kw Natural Gas Generators with Silent Canopy
Basic Info
Model No.: LHNG
Product Description
Model NO.: LHNG Gas Source: Natural Gas Power: >200kW Rated Power: 10-5000kw Rated Frequency: 50/60Hz Model Number ( Engine Type): Lhng Exciting Method: Brushless Overhaul Time: >30000h Trademark: LVHUAN Specification: 6200x2100x2650mm HS Code: 85022000 Output Type: AC Three Phase Certification: CE, ISO, Patents Standard: Standard Prime Power: 8-4000kw Rated Voltage: 400V/230V Power Factor: 0.8 Gas Pressure: 80-200 Kpa Rated Speed: 1000/1200/1300/1500r/Min Transport Package: Exporting Standarded Packing Origin: Shandong, China(Mainland) Product Description
CE approved Natural Gas Generator
1. +20 years professional manufacturer.
2. Wide power range: 10kw-5000kw Gas Generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLC control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
9. Full Range: our products mainly include natural Gas generator , biogas generator, biomass Generator , Coal Gas Generator, syngas generator, coal-bed gas generator, coke oven gas generator, Diesel Generator etc.
Product Features
Main Spare Parts :
1.Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3.Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor.
5. Mixer: IMPCO
6. Spark plug: STITT
Genset worksite requirements
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 3500m;
d) For outdoor installation, simple rain shelter is required.
Requirements for Biogas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 80~200kpa, Changing Rate≤1kpa/min
3. H2S≤20mg/Nm³
4. Content of CH4≥70%
5. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
6. Moisture Content≤40g/Nm³
Some Tips
Higher content of sulfur and ammonia is not only seriously corrodes the spark plug, but also increase the lubricant's acid value, and then gen-set internal parts will be corroded partly. That will shorten the gen-set's life time. So the gas scrubbing is very important!
Technical Parameters
Parameters for 10-600kw Natural Gas Gen-set
Applied Range
1. Oil Field
2. Industrial Zone
3. Petroleum Chemical
4. Using Natural Gas Generator set as Standby Power Source
5. Supplying Power for Auxiliary Engine which work in Oil Well.
Service committee:
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification, keep good quality.
FAQs:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.
2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
3. What's the genset warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
7. What is your regular delivery time?
20 days after order releasing.
Please feel free to contact Sarah for any question.
Sarah Tian
Phone: +86 18678896956
Contact us if you need more details on Generator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Engine、Power Generator. If these products fail to match your need, please contact us and we would like to provide relevant information.
CE approved Natural Gas Generator
1. +20 years professional manufacturer.
2. Wide power range: 10kw-5000kw Gas Generator, single or parallel running.
3. Multi-option of engine, alternator, control system and cooling system, PLC control panel.
4. Long continuous running hours, 8000 hours per year.
5. CE & ISO approved
6. OEM provided
7. Holding many patents
8. Perfect service system(Sales, Installation, Debugging and after-sale service)
9. Full Range: our products mainly include natural Gas generator , biogas generator, biomass Generator , Coal Gas Generator, syngas generator, coal-bed gas generator, coke oven gas generator, Diesel Generator etc.
Product Features
Main Spare Parts :
1.Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3.Ignition system: American ALTRONIC, including:magneto, high-tension coil
4. Starting system: DC 24V electric motor.
5. Mixer: IMPCO
6. Spark plug: STITT
Genset worksite requirements
The worksite needs to meet following basic requirements:
a) Ambient temperature between -40ºC~40ºC;
b) Relative humidity less than 95%(35ºC);
c) Site elevation not higher than 3500m;
d) For outdoor installation, simple rain shelter is required.
Requirements for Biogas
Within 1m from pressure regulation valve of gas intake
1. Gas Temperature≤40ºC
2. Pressure 80~200kpa, Changing Rate≤1kpa/min
3. H2S≤20mg/Nm³
4. Content of CH4≥70%
5. Impurity Particle Size≤5μm, impurity content≤30mg/Nm³
6. Moisture Content≤40g/Nm³
Some Tips
Higher content of sulfur and ammonia is not only seriously corrodes the spark plug, but also increase the lubricant's acid value, and then gen-set internal parts will be corroded partly. That will shorten the gen-set's life time. So the gas scrubbing is very important!
Technical Parameters
Parameters for 10-600kw Natural Gas Gen-set
Parameter of 10-600kw Natural gas generator set | |
Model Number | LHNG |
Brand Name | LVHUAN |
Prime Power | 8-480KW |
Rated Power | 10-600KW |
Gas Mixed Mode | Outside |
Rated Speed | 1500rpm/1000rpm |
Rated Frequency | 50/60Hz |
Rated Voltage | 400V/230V |
Rated Current | 18-1080A |
Phase | AC 3-Phase, 4 Wire |
Gas Pressure | 80-200kpa |
Intake Mode | Natural Intake/Supercharging and Inter Cooler |
Voltage Stability | ≤±2% |
Voltage Transient | ≤±10% |
Voltage Stable Time | ≤1s |
Heat Consumption | ≤9.8mj/kw.h |
Lubricant Consumption | 1-1.3g/kw.h |
Noise | 75-105dB(A) |
Cylinder Number | 4/6/12 |
Cylinder Bore | 100/105/135/138/190mm |
Starting System | DC 24V Electric Motor |
Sparking Mode | Spark Plug |
Cooling Method | Circlulating Water Cooling |
Lubricant Method | Passive and Flying Lubricant |
Isolation Class | H |
Protection | IP23 |
Alternator | Siemens, Standford, Leroy Somer, Marathon, etc. |
Power Factor | 0.8 Lagging |
Exciting Method | Brushless |
Colour | You Decide |
Certificates | ISO 9001:2008, CE |
Warranty | 1 Year |
Overheal Time | More Than 30000h |
Type | Open |
Control System | Automatic Alarm System |
Size | 1450*700*1100mm~6000*1970*2735mm |
Weight | 600kg~12000kg |
Applied Range
1. Oil Field
2. Industrial Zone
3. Petroleum Chemical
4. Using Natural Gas Generator set as Standby Power Source
5. Supplying Power for Auxiliary Engine which work in Oil Well.
Service committee:
1. Pre-sale service:
1) We will send our engineer to prospect the site of power station free of charge.
2) According to the situation of site, we will provide design drawings, such as power plant floor drawing, cooling system drawing, genset foundation, control room design, etc.
2. Sale service:
1) Operator training would be conducted by Lvhuan technicians during the process of commissioning or Factory training course in China,
2) Installation and commission of the genset would be instructed assisted by Lvhuan technicians at site.
3. After-sale service:
1) We have strong after-sale team, we will response within 24 hours and provide technical supports by phone or site guiding, help our clients to gain the biggeset profit.
2) For the quality problem, we will service for you free of charge during the guarantee period.
3) We provide one year guarantee period and lifetime service.
Plentiful spare part supply:
1. We have spart parts department, plentiful spare part supply for all genset model will guarantee genset lifetime running.
2.All parts were from original factories or professional factories,complete in specification, keep good quality.
FAQs:
1. Are you factory? and where is your factory?
Yes, we are. Our factory is located in Zhangqiu Longshan subdistrict, Jinan city, Shandong province, Welcome to visit our factory.
2. How to choose the right model?
To choose a right model, we need to know required continuous output power, local voltage and frequency and fuel (such as diesel, natural gas, biogas, biomass gas, coal gas, syngas, etc.). For biomass power plant and coal gas power plant, some clients may doesn't have gasification system, then we need information about raw material.
3. What's the genset warranty?
The warranty is one year. We will offer free service and spare parts during warranty period. Lifetime service will be provided by our trustworthy after-sale team.
4. How to do the maintenance?
Operator training will be provided by our technician. After training, local operator can do the basic maintenance by themselves according to our maintenance manual.
5. Will be operation training offered?
Yes, operator training would be conducted by our technicians during the process of commissioning or factory training course in China.
6. What's about the installation and commissioning?
Installation and commissioning of the genset would be instructed assisted by our technicians on site.
7. What is your regular delivery time?
20 days after order releasing.
Please feel free to contact Sarah for any question.
Sarah Tian
Phone: +86 18678896956
Contact us if you need more details on Generator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Engine、Power Generator. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Natural gas generator set
Premium Related Products
Other Products
Hot Products
10kw-5MW Biomass Wood Gas Gasifier Applied Thermoelectric CHP Biomass GeneratorBiogas Plant Applied Ce Approved CHP Cogeneration Biogas Generator 600kwBest in China Generator Manufacturer Supplied 500kw Natural Gas GeneratorBISON(CHINA) gasoline welding generator high quality BS6500WGBISON(CHINA) Generator Spare Parts Supplier AVR For Generator SetBISON(CHINA) Generator Supplier All Kinds Of Gas Generator, LPG Generator, Biogas GeneratorBISON(CHINA)All Kinds of Gasoline Generator spare parts, Gasoline Generator AVRBison China Zhejiang Cheap Silent Portable Generator with Good PriceBISON(CHINA) Made In China Factory Price Reliable Ceramic Plunger Pump For SaleBISON(CHINA) 2.6HP Engine, Gasoline EngineBISON(CHINA) 2kw Diesel Generator, portable diesel generator open typeBISON(CHINA) 1.5inch Pump Powered by HondaBISON(CHINA) 1.5kva Gasoline GeneratorBISON(CHINA) 3kw Gasoline GeneratorBISON(CHINA) 950 650W GeneratorBISON(CHINA) 65dB(7m) Silent Inverter Generator BS2000I