China 500kw Natural Gas Generator with Power Generator Price List

Model NO.: LHCG500 Certification: CE, ISO, CCC Standard: Standard Cooling Mode: Circulating Water Cooling Intake Mode: Natural Intake Gas Pressure: 3-20 Kpa Power Factor: 0.8 Lagging Trademark: LVHUAN Specification: 500KW HS Code: 85022000 Gas Source: Gas Power: ＞200kW Exciting Method: Brushless Gas Mixing Type: Outside Sparking Mode: Sparking Plug Rated Voltage: 400/230V Speed: 1000/1200rpm Transport Package: Export Standard Packing Origin: Shandong, China Shandong Lvhuan Power Equipment Co., Ltd. Is a manufacturer which specially produces internalmbustion Gas Engine Generator sets and gas engines, with registered capital of more than RMB10 million, annual turnover of RMB100 million, over 200 staff, beautiful scenery and convenient transportation. Our factory mainly specializes in the design, research, production, sale, installation and technical service of Gas Generator sets and Diesel Generator sets. Our company has strong specialty, powerful technical force, a complete production plant, advanced processing technology, mature inspection method and a strict test system. 

Ignition system: We adopt ignition system of magneto which produced by American ALTRONIC company, including: Magneto, high-tension coil, sparking plug. 
Starting system: DC24V electric motor, 12v190 adopt ST710 of direct-current. 
Pressure charging system: Pulse Mixed-flow supercharger, compression ration is 1: 8, meet Engine 's requirement for gas-flow rate. 
Speed regulating system: EGS gas controller of American WOODWARD Company. 
Scope of application: Biogas Generator Set is widely used in the many area where can generate biogas, like rubbish landfill, livestock excrement disposal, industrial organism disposal. 

Parameter of Coal gas generator set
Model Number (Engine Type)	LHNG500
Brand Name	LVHUAN
Prime Power/Standby Power	400KW/500KW
Rated Speed	1000/1200RPM
Rated Frequency	50/60Hz
Rated Voltage	400V/230V
Phase	AC 3-Phase, 4 wire
Voltage Stability	≤±2%
Voltage transient	≤±10%
Voltage Stable time	≤1s
Heat consumption	≤11mj/kw. H
Lubricant Consumption	≤1.0g/kw. H
Engine Capacity	71.4L
Cylinder Number	12-V
Cylinder Bore	190mm
Stroke	210mm
Starting System	DC 24V electric motor
Cooling method	Water cooler
Lubricant method	Passive and flying lubricant
Isolation class	H
Protection	IP23
Alternator	Siemens
Power Factor	0.8 lagging
Exciting method	Brushless
Colour	Your choice
Certificates	ISO 9001: 2008, CE
Warranty	1 year or 1000 running hours which arrives first
Type	Open
Control system	Automatic alarm system
Size	6200x2100x2800mm
Weight	12500kg

Main Spare Parts : 
1. Control system: America Woodward control system
2. Controller: ComAp, Deepsea, Woodward
3. Ignition system: American ALTRONIC, including: Magneto, high-tension coil
4. Starting system: DC 24V electric motor. 
5. Mixer: IMPCO
6. Spark plug: STITT Worksite requirements for Generator : The worksite needs to meet following basic requirements: A) Ambient temperature between -40ºC~40ºC; B) Relative humidity less than 95%(35ºC); C) Site elevation not higher than 2500m; D) For outdoor installation, simple rain shelter is required. 

Worksite requirements for generator: 
The worksite needs to meet following basic requirements: 
A) Ambient temperature between -40ºC~40ºC; 
B) Relative humidity less than 95%(35ºC); 
C) Site elevation not higher than 2500m; 
D) For outdoor installation, simple rain shelter is required. 


Service
1. Pre-sale service: 
(1)We will send our engineer to prospect the site of power station free to charge. 
(2)According to the situation of site we can supply you many drawings: Like power station floor plan, engineering flow sheet of circle cooling system, genset installation, genset foundation, electrical connection and some other techincal support etc. 
2. Sale service: 
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment. 
(2)We will debug the generator set till it can generate power successfully. 
(3)We will also supply a technical training to the operators. Orcan send your staff to our company. We can train you till you can operate the generator set. 
3. After-sale service: 
(1)Our every engineers are in charge of different area, we will response periodically and support you technical service free of charge, 
(2)For the quality problem, we will service for you free of charge during the guarantee period. 
(3)One year guarantee period and lifetime service. 
(4)we solve quality problem in time when genset doesn't work, We insure to help our clients to gain the biggest economic profit. 

FAQ: 
1. How to choose the right model? 
A: It depends on real output power, Voltage, Frequency and gas type. 
2. What is the oil consumption and capacity per hour? 
A: 1.0-1.63g of lubricant oil consumption per hour. 1.0 Cubic meter gas can produce 1.5-3.0kw/h power. The capacity depends on gas energy. E. G 1.0 Cubic meter natural gas produce about 3.0kw/h
3. What is the overhaul? 
A: About 30000 working hours. A week is enough to finish. 
4. What is the warranty? 
A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare parts are not free. But, a set of spare parts will be shipped together with machine free. 
5. How is the service? 
A: We offer installation, repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it. 
Please feel free to ask question and quotation. 

Contact us if you need more details on China 500kw Natural Gas Generator with Power Generator Price List. We are ready to answer your questions on packaging, logistics, certification or any other aspects about China Gas Generator set、China Power Generator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Coal gas generator set